Detailed Description

Water-based interior finishing paint for brush application onto pre-decorated surfaces, used to achieve special iridescent golden reflections with or without glitter effects from matching iridescent colours. APPLICATION: It is applied by brush using circular movements on any surfaces which have already been painted with Artecò 3, Artecò 7, Polistof and any other well-adhering paint, as long as they have been cleaned and are free of grease and dust. CHARACTERISTICS: 15 days after application, VELIDOR will have acquired its definitive properties and will have become breathable and washable. At this stage, VELIDOR may also be painted over without having to be removed, because this product has also been designed for use as a Primer for future applications of water paint. TECHNICAL DATA: Specific Weight: 1,030 ± 30 g/l at 20°C. Dilution: ready to use. Yield: 1 litre per 15 - 20 m². Packaging: Velidor is available in 1 litre tins Application Temperature: over +5°C and under +35°C. Drying: dry after 6 - 8 hours at 20°C. It hardens after 24 - 36 hours depending on the environmental temperature. Product aspect: special iridescent reflections. Resistance: a breathable film which is resistant to knocks and normal abrasion is obtained once the paint has hardened properly. Washability: may be washed with water and common detergents 15 days after application at 20°C. Cleaning of tools: with water and soap. Storing: in a well-sealed tin, even after use, at a temperature over +5°C and under +30°C. Stability: 2 years approximately. SPECIFIC SAFETY RULES: Flame-proof - Non-toxic - Danger warning label is not required according to current regulations. USER ADVICE: All information listed is, to the best of our knowledge, precise and accurate. However, as the conditions in which the product is applied are beyond our direct control, the manufacturer does not assume any responsibility for the advice and suggestions given. There may be a 20% - 30% colour shade difference between the catalogue and the product, and between one batch and another. As a result it is strongly recommended that the product is tested first on a small surface so as to evaluate the final aesthetic effect and the colour once it has dried, because VELIDOR changes tone depending on the colour of the surface to which it is applied.